NanoguardTMCL-365 Shield is an antiviral product developed by Nano Sciences and Ozone Technologies pvt ltd. Using Nano silver technology, this product is capable of killing up to 99.9% viruses ​(as per antiviral test for non absorbent surfaces as per ISO: 21702) on​ non-absorbent solid surfaces​.The tried and tested Nano silver technology helps in not only tackling bacteria and fungus, but also helps in fighting viral spread and growth. Its high coverage area per liter and durability over time makes it a better coating than any other product.

Application Areas

It can cover a plethora of ​non-absorbent solid surfaces​making it useful in various application areas like:

  1. Plastics (Tables, chairs, delivery box and packets)
  • Glass surfaces (windows, glass tables, mirrors)
  • Metal surfaces (stairway railings, gates, door handles)
  • Ceramics and various other surfaces (elevator buttons, switches, knobs, leather sofa)

Key Benefits:

Broad spectrum antimicrobial action. Kills 99.9% disease causing Microbes

Easy to use & Clean

Long Lasting action

Hydrophobic and Non-Stick

Surface protection and resistant slight dust, dirt, spills etc

Technical Information:

Coverage: 1500- 2000 Sq. feet/ Ltr
Drying time: 15 mins – 1hr
Minimum thickness of coating: 80-100um

Best for External/Internal Usage.


Along with a strong antiviral property, it also provides additional benefits like:

  1. Hydrophobicity
  • Longer durability time
  • Dirt repellent
  • Gloss
  • Easy application
  • Variety of non-absorbent solid surfaces covered with one product
  • Smooth finish

Technical information

Appearance : Highly viscous gel  
Colour : transparent  
Odour : ester-like  
pH: neutral, 6.5 – 7.5  
Stability : 3 °C to 40 °C  
User temperature : 15 °C to 35 °C  
Viscosity, dynamic : 2 mPas (20 °C) ; method: DIN 53 015  
Specific density (Kg/dm3) : 0.92  
Relative density vs. water : 0.92  
Viscosity, dynamic : 100 – 1.500 mPas at 25 °C  
Water Solubility in water (g/ 100 ml) : miscible  
Flash point (°C) : > 93 °C, Method ; DIN EN ISO 2719 Pensky-Martens,  
Explosion limit – lower (°C) : Closed Cup  
0.5  %  (V)(200  °C)  method  ;  DIN  EN  1839  
Explosion limit – upper (°C) : > 13,5 %(V) (200 °C) method ; DIN EN 1839  


Pre-Cleaning steps

  • Recommended to use gloves while using this product.
  • Clean the surface and make it dry and dirt free.
  • Shake the coating well before use.

Coating Application steps


  • The coating is easy to handle and simple do-it-yourself application makes it easier for end customers to apply it.
  • Pour the coater in a spray bottle.
  • Spray the coater over the surface you want to coat.
  • Wipe the treated surface with microfiber cloth until it dries.
  • Let it dry for 24 hours for curing.


  • Pour the coater in a wide mouth container.
  • Use a paint brush or roller to apply it on the surface.
  • Let it dry for 24 hours for curing.


  • Uniform spraying or Dip coating systems in order to apply the product evenly to the surface (HVLP-sprayers, aerosols, HDPE trigger Sprayers, industrial spray systems).

Note: Drying and ageing Times time is subject to proper conditions such as temperature and humidity, good airflow and film build of the topcoat

Post Cleaning Care

  • Remove any stains over coated surface using microfiber cloth.
  • Remove all dirt using a clean cloth or duster. Always remove dirt from top to bottom, it helps dirt to smudge.
  • Do not use any other coating after using Clear Coat Ag+Shield.
  • Post care will increase the protection time.

Safety Features

  • Kindly refer to the MSDS for NANOGUARDTM​ CLEAR SILVER SHIELD which gives detailed information on safety measures while handling the coating.
  • Keep out of reach of children.
  • May be harmful if swallowed. In case of ingestion seek immediate medical attention.
  • Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of skin
  • contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops.
  • Avoid inhalation of coating vapour. It is recommended to wear suitable mask during use and preparation.
  • Left-over cleaners/containers should not be disposed in soil/drains. Consumers should consult a local recycling agency for proper disposal of paint/drums.


  • Apply at room temperature.
  • Stir well before use.
  • Use coating on small surface before using on large surface for test results.
  • Test the efficacy of coating on leather surface.
  • Ensure the leather surface is fully covered/wet by the coating.
  • This is not a medical product, should not be used on body.


  • Store the left over coating in the opaque container.
  • Close the container lid tightly.
  • Keep it in dark and cool place
  • Use within 6 months after opening the container.
  • Could be stored for 12 months in ambient condition and original packing.